Description
| Range of product | PowerLogic |
|---|---|
| product name | PowerTag A9 F63 |
| product or component type | Energy sensor |
| Poles | 3P + N |
| Maximum current [Imax] | 63 A |
| [Ib] basic current | 10 A |
| starting current | 40 mA |
| saturation current | 130 A |
| product specific application | Cost allocation Load monitoring Overload alarm Circuit monitoring Energy management |
| Concentrator compatibility | Acti9 Smartlink SI B Acti9 Smartlink SI D Acti9 PowerTag Link C Acti9 PowerTag Link Acti9 PowerTag Link HD Harmony Hub Wiser IP module EcoStruxure Panel Server Universal EcoStruxure Panel Server Advanced PrismaSet Active |
| range compatibility | Vigi DT40 Vigi iC40 Vigi iDT40 Vigi N40 Vigi C40 Vigi iC60 Acti 9 iDD40 Acti 9 iDD40 XA Acti 9 iCV40 XA Vigi iDPN Acti 9 iCV40 Vigi iTG40 Vigi iCG40 |
| type of measurement | Voltage Active energy Active power Current Power factor |
| accuracy class | Class 1 current conforming to IEC 61557-12 Class 0.5 voltage conforming to IEC 61557-12 Class 1 active power conforming to IEC 61557-12 Class 1 active energy conforming to IEC 61557-12 Class 1 power factor conforming to IEC 61557-12 |
| mounting location | Top or bottom |
| mounting support | On circuit breaker |
| product destination | Switchboard |
| Event management | Voltage loss with measured current at voltage loss |
| transmission support medium | Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4 |
| emission power | 10 mW |
| mounting mode | By screws (terminals) |
|---|---|
| Electrical connection (voltage sensing & power supply) | Wires with cable end |
| cable cross section | 1 rigid cable 1.5…16 mm² 2 stranded cable 1.5…2.5 mm² 2 rigid cable 1.5…2.5 mm² 1 stranded cable 1.5…16 mm² |
| cable length | 0.25 m |
| supply voltage | 220...240 V AC, +/- 20 %, between phase and neutral 380...415 V AC, +/- 20 %, between phases |
| network frequency | 50 Hz 60 Hz |
| Maximum power consumption | 2 VA |
| standards | IEC 61557-12 IEC 61010-1 IEC 61010-2-030 IEC 61326-1 ETSI EN 300 328 ETSI EN 301 487-1 |
| height | Sensor element: 20 mm |
| width | Sensor element: 54 mm |
| depth | Sensor element: 46.6 mm |
| net weight | 40 g |
| colour | White (RAL 9003) |
| quality labels | CE |
|---|---|
| directives | 2014/53/EU - radio equipment directive |
| operating altitude | 0...2000 m |
| ambient air temperature for operation | -25…60 °C |
| ambient air temperature for storage | -40…85 °C |
| overvoltage category | III conforming to IEC 61010-1 |
| measurement category | Category III conforming to IEC 61010-2-030 |
| IP degree of protection | IP20 conforming to IEC 60529 |
| IK degree of protection | IK05 |
| pollution degree | 3 |
| relative humidity | 0…95 % at 45 °C conforming to IEC 60721-3-3 |
| vibration resistance | 3M4 conforming to IEC 60721-3-3 |
| electromagnetic compatibility | Industrial electromagnetic environment conforming to IEC 61326-1 Radiated EMC conforming to ETSI EN 301 489-17 Electromagnetic emission conforming to IEC 62311 |
| environmental characteristics | Dustproof class 3S3 conforming to IEC 60721-3-3 Salt mist class 3C2 conforming to IEC 60721-3-3 Indoor use |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Weight | 78.0 g |
| Package 1 Height | 6.5 cm |
| Package 1 width | 7.5 cm |
| Package 1 Length | 8.0 cm |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 30 |
| Package 2 Weight | 2.69 kg |
| Package 2 Height | 15.0 cm |
| Package 2 width | 30.0 cm |
| Package 2 Length | 40.0 cm |
DOWNLOADS
You may also like
Recently viewed
Delivery
We deliver lighting products across Australia. Delivery charges are calculated at checkout. Some bulky products and remote-area deliveries may require a revised freight quotation. We will contact you before dispatch if any additional freight charges apply.
Available products are generally dispatched within 1–3 business days. Delivery normally takes an additional 2–10 business days, depending on the delivery location, supplier location and size of the products. We will contact you if an item has a longer lead time.
We use a range of national freight carriers and local couriers. The carrier is selected based on the size of the order and the delivery location.
Need help choosing the correct product?
Please contact us before returning any product. Returns are assessed in accordance with our Terms and Conditions and may be subject to supplier approval, return freight and restocking charges. Products must not be installed, used or damaged unless the product is being returned due to a fault.
Other
Our lighting team can help confirm specifications, compatibility and product availability before you order. Call us on (02) 9517 2701 or email sales@ecosmartlighting.com.au.
Ask a Lighting Specialist
Need help confirming a product specification, model number or compatibility? Contact our lighting team before placing your order.
